HP Console 사용방법 ( MP 사용법 )

HP 서버의 Console 사용 방법입니다..

1. HP Superdome

1.1  Console 사용방법

Lan console이 연결된 PC 또는 SMS서버에서 telnet으로 연결

Console IP는 notebook으로 먼저 serial연결을 통해 알아낸다. 

1.1.1  GSP/MP 접속

C:> telnet 172.0.0.1

 

MP login: Admin  => default Admin계정명

MP password: Admin => default Admin계정 password  입력하면 아래와 같은 MP> prompt가 떨어진다.

 

(c)Copyright 2000 Hewlett-Packard Co.,  All Rights Reserved.

 

                             Welcome to

                  Superdome's Management Processor

 

Utility Subsystem FW Revision Level: 14.22 

 

    MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

1.1.2  CONSOLE 접속

[ssc_dw] MP> co => MP모드에서 console모드로 접근한다.

 

    Partitions available:

 

     #   Name

    ---  ----

     0)  ssc_dw

     1)  dev-dw

     Q)  Quit

 

Please select partition number: 0   => 접근하고자 하는 partition 번호를 선택

 

 

        Connecting to Console:  ssc_dw                                          

                

        (Use ^B to return to main menu.)

 

 

- - - - - - - - - - Prior Console Output - - - - - - - - - -

 

cab0,cell2 active core  8/0/8   10.0/ 0.0 cab0,bay1,chassis1  yes     yes  1

cab0,cell3 active base  4/0/8    4.0/ 0.0 -                   no      yes  0

cab0,cell4 active base  8/0/8   10.0/ 0.0 cab0,bay0,chassis3  yes     yes  1

cab0,cell5 active base  4/0/8    4.0/ 0.0 -                   no      yes  0

cab0,cell6 active base  4/0/8    4.0/ 0.0 -                   no      yes  0

cab0,cell7 absent       -       -         -                   -       -    -

 

# 

 

 

1.1.3 MP 모드 복귀

# ctrl^b (Ctrl + b를 눌러 MP모드로 다시 갈수 있다.) 

 

    MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

1.1.4  파티션 별 부트상태 확인

[ssc_dw] MP> vfp  => partition별로 시스템 부팅과정이나 상태를 확인할 수 있다.

 

 

 

              Entering Virtual Front Panel

 

Select terminal type:

[1] hpterm, 70092, 70094, 2392

 2  vt100, vt220, ansii, xterm

MP:VFP> 

        Welcome to the Virtual Front Panel (VFP).

        Use ^B to exit.

 

 

    Partitions available:

 

     #   Name

    ---  ----

     0)  ssc_dw

     1)  dev-dw

     S)  System (all partitions)

     Q)  Quit

 

Please select partition number: 0  => 0번 partition의 Cell state와 Activity상태가 나온다.

  #  Cell state                    Activity

  -  ----------                    --------

[ssc_dw] MP:VFP (Use '?' to display help or ^B to Quit) >  

 

 

 

1.1.5  Command Mode(CM)로 전환

MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

[ssc_dw] MP> cm  => Command Mode (CM)으로 간다.

 

 

                Enter HE to get a list of available commands

 

                      (Use ^B to return to main menu.)

 

1.1.6  CM모드에서 할 수 있는 명령어

[ssc_dw] MP:CM> he  => CM모드에서 할 수 있는 명령어 들이다. 이 문서에서는 주로 사용하는 명령어 위주로 설명하였다.

 

 

Management Processor (MP) - FW Revision 14.22, Dec  9 2003 at 15:00:01

 

Utility Subsystem FW Revision Level: 14.22 

 

 

The following are the service commands that are available

 

BO      : Boot a partition.

DF      : Display FRU information of an Entity.

MA      : Return to the Main menu.

MR      : Modem Reset

PCIOLAD : Activate/Deactivate a PCI card.

PE      : Power entities on or off.

RE      : Reset entity.

RR      : Reset a partition for reconfiguration.

RS      : Reset a partition.

TC      : Send a TOC signal to a partition.

TE      : Broadcast a message to all users of the MP Command Handler.

VM      : Margin the voltage in a cabinet

WHO     : Display a list of MP connected users

CP      : Display partition cell assignments

HE      : Display the list of available commands

IO      : Display IO chassis/cell connectivity

LS      : Display LAN connected console status

MS      : Display the status of the Modem

PS      : Display detailed power and hardware configuration status.

SYSREV  : Display revisions of all firmware entities in the complex.

CA      : Configure Asynchronous and Modem parameters

CC      : Initiate a Complex Configuration

CP      : Display partition cell assignments

DATE    : Set the time and date

DC      : Reset parameters to default configuration

DI      : Disconnect Remote or LAN Console

ID      : Change certain stable complex configuration profile fields

IO      : Display IO chassis/cell connectivity

IT      : Modify command interface inactivity timeout

LC      : Configure LAN connections 

LS      : Display LAN connected console status

PARPERM : Enable/Disable Partition Reconfiguration

PD      : Modify default Partition for this login session.

RL      : Rekey Complex Profile Lock

SA      : Display and Set MP Remote Access

SO      : Configure Security Options and Access Control

XD      : MP Diagnostics and Reset

 

 

1.1.7  POWER및 HW구성상태

[ssc_dw] MP:CM> ps => power및 hw구성상태를 볼 수있다.

 

This command displays detailed power and hardware configuration status.

 

The following MP bus devices were found:

+----+-----+-----------+----------------+-----------------------------------+

|    |     |           |                |              Core IOs             |

|    |     |           |                | IO Bay | IO Bay | IO Bay | IO Bay |

|    |     |   UGUY    |     Cells      |    0   |    1   |    2   |   3    |

|Cab.|     |           |                |IO Chas.|IO Chas.|IO Chas.|IO Chas.|

| #  | MP  | CLU | PM  |0 1 2 3 4 5 6 7 |0 1 2 3 |0 1 2 3 |0 1 2 3 |0 1 2 3 |

+----+-----+-----+-----+----------------+--------+--------+--------+--------+

|  0 |  *  |  *  |  *  |* * * * * * *   |  *   * |  *   * |        |        |

You may display detailed power and hardware status for the following items:

 

    B - Cabinet (UGUY)

    C - Cell

    G - MP

    I - Core IO

        Select Device: b   => cabinet의 정보를 보고자할 때 선택

 

    Enter cabinet number: 0  => 0번 cabinet선택

 

HW status for SD32A compute cabinet #0: NO FAILURE DETECTED

Power switch: on;  Power: enabled, good;  Door: closed

Fan speed: normal;  Temperature state: normal

Redundancy state: fans and blowers redundant, BPSs redundant

 

                      | Main BP|                 |    IO Backplanes    |

                      | Power  |                 | IO Bay 0 | IO Bay 1 |

               | Main | Boards |      Cells      | Chassis  | Chassis  |

               | BP   | 0 1 2  | 0 1 2 3 4 5 6 7 | 0 1 2 3  | 0 1 2 3  |

+--------------+------+--------+-----------------+----------+----------+

 Populated     |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  |

 Power Enabled |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  |

 Powered On    |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  | => power on상태이번OK

 Power Fault   |      |        |                 |          |          | => fault에 표시없으면OK

 Attention LED |      |        |                 |          |          |

 

                          | Cabinet |    IO     |

            |     BPS     | Blowers |   Fans    |

            | 0 1 2 3 4 5 | 0 1 2 3 | 0 1 2 3 4 |

+-----------+-------------+---------+-----------+

  Populated | * * * * * * | * * * * | * * * * * |

  Failed    |             |         |           | => faile에 표시가 없으면 OK

 

               -- Press <CR> to continue, or 'Q' to Quit --

 

Voltage margin: nominal;  Clock margin: nominal

 

              CLU Status    PM Status    CLU POST

UGUY LEDs:    ***_____      ****         ____

 

                              | Parity   | Connected  | Location      |

 Flex connections | Connected | error    | to cabinet | (Upper/Lower) |

+-----------------+-----------+----------+------------+---------------+

  XBC [7-0]       | NYNYNYNY  | NNNNNNNN | 00000000   | N/A           |

  RC [7-0]        | NNNNNNNN  | NNNNNNNN | 00000000   | LLLLLLLL      |

 

PM  firmware rev 14.6, time stamp: TUE SEP 30 12:18:17 2003

CLU firmware rev 14.4, time stamp: WED JUL 09 14:57:57 2003

 

[ssc_dw] MP:CM> ps

 

This command displays detailed power and hardware configuration status.

 

The following MP bus devices were found:

+----+-----+-----------+----------------+-----------------------------------+

|    |     |           |                |              Core IOs             |

|    |     |           |                | IO Bay | IO Bay | IO Bay | IO Bay |

|    |     |   UGUY    |     Cells      |    0   |    1   |    2   |   3    |

|Cab.|     |           |                |IO Chas.|IO Chas.|IO Chas.|IO Chas.|

| #  | MP  | CLU | PM  |0 1 2 3 4 5 6 7 |0 1 2 3 |0 1 2 3 |0 1 2 3 |0 1 2 3 |

+----+-----+-----+-----+----------------+--------+--------+--------+--------+

|  0 |  *  |  *  |  *  |* * * * * * *   |  *   * |  *   * |        |        |

 

You may display detailed power and hardware status for the following items:

 

    B - Cabinet (UGUY)

    C - Cell

    G - MP

    I - Core IO

        Select Device: c  => cellboard별로 status확인할 때 

 

    Enter cabinet number: 0

    Enter slot number: 0

 

HW status for Cell 0 in cabinet 0: NO FAILURE DETECTED

Cell power Status: enabled, good, no fault, NVRAM battery good

Boot is NOT blocked; PDH shared memory is Initialized

Cell Attention LED is off, PDH status LEDs:  _***

Cell enabled by PDHC 

Core cell is cabinet 0, cell 0

RIO cable status: connected

RIO cable connection physical location: cabinet 0, IO bay 1, IO chassis 3

 

|    CPU Modules    |                        |Cell Power Board |

|         |         |       Cell Board       |Converter Faults |

|Populated| Faulted | Power Converter Faults | MEM | JAB | IB  |

| 0 1 2 3 | 0 1 2 3 |CLK|L2C|LNK|CORE|FSB|48V|0 1 2| 0 1 |0 1 2|

+---------+---------+---+---+---+----+---+---+-----+-----+-----+

| * * * * |         |   |   |   |    |   |   |     |     |     |

 

|                 |   Side: |        A       |        B       |

|  DIMM Presence  | Echlon: |0123456789ABCDEF|0123456789ABCDEF|

|                 |         |*****___________|*****___________|

 

Cell Compatibility: Complex - B, Partition - C; CPU Compatibility: C

PA System firmware rev 20.8

 

 

1.1.8  SYSTEM FIRMWARE LEVEL 확인

[ssc_dw] MP:CM> sysrev => system firmware level를 확인하는 명령어

Utility Subsystem FW Revision Level: 14.22 

 

                       |   Cabinet #0    |

-----------------------+-----------------+

                       | SYS FW |  PDHC  |

Cell (slot 0)          |  20.8  |  14.18 |

Cell (slot 1)          |  20.8  |  14.18 |

Cell (slot 2)          |  20.8  |  14.18 |

Cell (slot 3)          |  20.8  |  14.18 |

Cell (slot 4)          |  20.8  |  14.18 |

Cell (slot 5)          |  20.8  |  14.18 |

Cell (slot 6)          |  20.8  |  14.18 |

Cell (slot 7)          |        |        |

                       |                 |

MP                     |      14.22      |

ED                     |       2.2       |

CLU                    |      14.4       |

PM                     |      14.6       |

CIO (bay 0, chassis 1) |      14.4       |

CIO (bay 0, chassis 3) |      14.4       |

CIO (bay 1, chassis 1) |      14.4       |

CIO (bay 1, chassis 3) |      14.4       |

 

[ssc_dw] MP:CM> 

 

1.1.9 POWER ON/OFF

[ssc_dw] MP:CM> pe => 시스템 cabinet 또는 cell 또는 IO chassis단위로 power on/off를 하는 명령어

 

This command controls power enable to a hardware device.

 

    B - Cabinet

    C - Cell

    I - IO Chassis

        Select Device: b

 

    Enter cabinet number: 0  => 0번 cabinet선택

 

    The power state is ON for Cabinet 0.

    In what state do you want the power? (ON/OFF) q  => off하면 0번 cabinet power off됨, 여기서는 q로 취소함.

[ssc_dw] MP:CM>

 

1.1.10  Chassis 연결 상태 확인

[ssc_dw] MP:CM> io => io chassis (io cardcage)와 cellboard간의 연결상태 확인명령어, cab-bay-chassis 순서로 확인된다. 이 번호는 전,후면 EMI panel 그림을 참조한다.

 

--------------------------+

Cabinet |   0    |   1    |

--------+--------+--------+

Slot    |01234567|01234567|

--------+--------+--------+

Cell    |XXXXXXX.|........|

IO Cab  |000.0...|........|

IO Bay  |101.0...|........|

IO Chas |311.3...|........|

 

1.1.11 GSP LAN 구성 확인

[ssc_dw] MP:CM> ls => customer LAN console및 private LAN console의 구성상태를 확인

 

Current configuration of MP customer LAN interface

  MAC address : 00:30:6e:f3:23:c1

  IP address  : 172.0.0.1       0xac000001

  Name        : ssc-dw                     (Flash : ssc_dw)

  Subnet mask : 255.255.255.0   0xffffff00

  Gateway     : 172.0.0.3       0xac000003

  Status      : UP and RUNNING 

 

Current configuration of MP private LAN interface

  MAC address : 00:a0:f0:00:f5:4b

  IP address  : 172.0.0.1       0xac000001

  Name        : ssc-dw                    

  Subnet mask : 255.255.255.0   0xffffff00

  Gateway     : 172.0.0.1       0xac000001

  Status      : UP and RUNNING 

 

1.1.12  실시간 사용자 리스트

[ssc_dw] MP:CM> who => lan console접근 사용자 검색

 

 

User Login         Port Name      IP Address

Admin                LOCAL     

Admin                LAN        172.  0.  0.  5

Admin                LAN        172.  0.  0.  5

 

 

1.1.13  파티션별 CELL BOARD 구성

[ssc_dw] MP:CM> cp => partition별로 할당된 cellboard 확인

 

-------------------------------+

Cabinet      |   0    |   1    |

-------------+--------+--------+

Slot         |01234567|01234567|

-------------+--------+--------+

Partition  0 |XX.X.XX.|........|

Partition  1 |..X.X...|........|

 

1.1.14 MP 모드 시간설정

[ssc_dw] MP:CM> date  => MP 모드의 시간설정 명령어

 

This command sets the date and time on the MP.

 

    Current date is: 11/18/04

    Do you want to modify it? (Y/[N]) q

 

 

1.1.15 OS 강제 DUMP (TOC)

[ssc_dw] MP:CM> tc  => partition상에 hang같은 문제가 발생시 dump를 받기위해 TOC할 때

 

This command TOCs the selected partition.

 

WARNING: Execution of this command irrecoverably halts all system

         processing and I/O activity and restarts the selected

         partition.

 

 

     #   Name

    ---  ----

     0)  ssc_dw

     1)  dev-dw

Select a partition number: q => 실제는 해당 partition을 지정

 

1.1.16 Partition Reset

[ssc_dw] MP:CM> rs => partition을 hard reset할 때 사용

 

This command resets the selected partition.

 

WARNING: Execution of this command irrecoverably halts all system

         processing and I/O activity and restarts the selected

         partition.

 

 

     #   Name

    ---  ----

     0)  ssc_dw

     1)  dev-dw

 

    Select a partition number: q => 실제는 partition number 지정

 

 

1.1.17 CONSOLE LOG 확인

[ssc_dw] MP:CM> 

 

    MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

[ssc_dw] MP> cl => parition별로 console log확인시 (console에서 작업했던 내용 trace시 필요)

 

    Partition Console Logs available:

#   Name

    ---  ----

     0)  ssc_dw

     1)  dev-dw

     C)  Clear a partition's console log.

     Q)  Quit

 

MP:VW> 1   => 1번 partition의 console에 display되었던 내용을 볼 때

lume groups and Activating (if any exist)

Volume group "/dev/vg00" has been successfully changed.

Activated volume group 

Volume group "/dev/vg01" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data01" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data02" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data03" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data04" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data05" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data06" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_data07" has been successfully changed.

Activated volume group 

Volume group "/dev/vg_db01" has been successfully changed.

 

(F)irst, (L)ast, (N)ext or <cr>, (P)revious, ^B to exit to menu

 

 

1.1.18 시스템상에 발생된 HW Chassis Log 보기

[ssc_dw] MP> sl   => 시스템상에 발생된 HW chassis log을 볼 때 사용

 

    EVENT LOG MENU:

 

        FPL: Forward Progress Log

        SEL: System Event Log

       LIVE: Live Events

 

        CLR: Clear FPL and SEL

          Q: Quit

 

MP:VW> sel  => system event log확인

 

 

             Welcome to the SEL (System Event Log) Viewer

 

   The following SEL navigation commands are available:

         D: Dump log starting at current block for capture and analysis

         F: Display first (oldest) block

         L: Display last (newest) block

         J: Jump to specified entry and display previous block

         +: Display next (forward in time) block

         -: Display previous (backward in time) block

      <cr>: Repeat previous +/- command

      <sp>: Repeat previous +/- command

         ?: Display help

        ^B: Exit viewer

 

   The following event format options are available:

         K: Keyword

         R: Raw hex

         T: Text

 

   The following event filter options are available:

         A: Alert level

         C: Cell

         U: Unfiltered

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  

19847 SFW  0,4,0  2 4b000f6240e000ca 01000000418ecb21 FABRIC_XIN_TRY_LINK_INIT

19847                                                 11/08/2004 01:25:53

19846 SFW  0,2,0  2 4b000f6220e000c9 01000000418ecb1b FABRIC_XIN_TRY_LINK_INIT

19846                                                 11/08/2004 01:25:47

19845 SFW  0,4,5  2 578003dd45e000c7 0000000000000003 ERR_TOC_TASK

19845                                                 11/08/2004 01:23:27

19844 SFW  0,2,2  2 578003dd22e000c5 0000000000000003 ERR_TOC_TASK

19844                                                 11/08/2004 01:23:27

19843 SFW  0,4,3  2 578003dd43e000c3 0000000000000003 ERR_TOC_TASK

19843                                                 11/08/2004 01:23:27

19842 SFW  0,2,7  2 578003dd27e000c1 0000000000000003 ERR_TOC_TASK

19842                                                 11/08/2004 01:23:26

19841 SFW  0,4,7  2 578003dd47e000bf 0000000000000003 ERR_TOC_TASK

19841                                                 11/08/2004 01:23:26

19840 SFW  0,2,5  2 578003dd25e000bd 0000000000000003 ERR_TOC_TASK

19840                                                 11/08/2004 01:23:26

19839 SFW  0,4,5  2 57800f7345e000bb 2000000000000000 ERR_CPU_CHECK_SUMMARY

19839                                                 11/08/2004 01:23:26

19838 SFW  0,4,1  2 578003dd41e000b9 0000000000000003 ERR_TOC_TASK

19838                                                 11/08/2004 01:23:26

 

19837 SFW  0,2,3  2 578003dd23e000b7 0000000000000003 ERR_TOC_TASK

19837                                                 11/08/2004 01:23:26

 

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > 

 

    MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

[ssc_dw] MP> sl

 

    EVENT LOG MENU:

 

        FPL: Forward Progress Log

        SEL: System Event Log

       LIVE: Live Events

 

        CLR: Clear FPL and SEL

          Q: Quit

 

MP:VW> sel

 

 

             Welcome to the SEL (System Event Log) Viewer

 

   The following SEL navigation commands are available:

         D: Dump log starting at current block for capture and analysis

         F: Display first (oldest) block

         L: Display last (newest) block

         J: Jump to specified entry and display previous block

         +: Display next (forward in time) block

         -: Display previous (backward in time) block

      <cr>: Repeat previous +/- command

      <sp>: Repeat previous +/- command

         ?: Display help

        ^B: Exit viewer

 

   The following event format options are available:

K: Keyword

         R: Raw hex

         T: Text

 

   The following event filter options are available:

         A: Alert level

         C: Cell

         U: Unfiltered

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > t  => text format모드로 좀 더 자세히 보고자 할 때

Switching to text format.

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  

Log Entry 19847:    11/08/2004 01:25:53

Alert level 2:  Informational 

Keyword:  FABRIC_XIN_TRY_LINK_INIT

About to initalize the CC link

Reporting Entity:  System Firmware located in cabinet 0, slot 4, cpu 0 

0x4b000f6240e000ca 0x01000000418ecb21

 

Log Entry 19846:    11/08/2004 01:25:47

Alert level 2:  Informational 

Keyword:  FABRIC_XIN_TRY_LINK_INIT

About to initalize the CC link

Reporting Entity:  System Firmware located in cabinet 0, slot 2, cpu 0 

0x4b000f6220e000c9 0x01000000418ecb1b

 

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  

Log Entry 19845:    11/08/2004 01:23:27

Alert level 2:  Informational 

Keyword:  ERR_TOC_TASK

This chassis code identifies the type of TOC encountered

Reporting Entity:  System Firmware located in cabinet 0, slot 4, cpu 5 

System Firmware Return Code:  0x0000000000000003

0x578003dd45e000c7 0x0000000000000003

0x4b0003dd45e000c8 0x01000000418eca8f

 

Log Entry 19844:    11/08/2004 01:23:27

Alert level 2:  Informational 

Keyword:  ERR_TOC_TASK

This chassis code identifies the type of TOC encountered

Reporting Entity:  System Firmware located in cabinet 0, slot 2, cpu 2 

System Firmware Return Code:  0x0000000000000003

0x578003dd22e000c5 0x0000000000000003

0x4b0003dd22e000c6 0x01000000418eca8f

 

 

MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > 

 

1.1.19 MP 접속 종료

MP MAIN MENU:

 

         CO: Consoles

        VFP: Virtual Front Panel

         CM: Command Menu

         CL: Console Logs

         SL: Show Event Logs

         FW: Firmware Update

         HE: Help

          X: Exit Connection

 

 

[ssc_dw] MP> x   => MP 접속 종료시