HP Console 사용방법 ( MP 사용법 )

IT,PC,모바일,스마트폰 정보와 팁 그리고 제품리뷰와 생활정보

HP Console 사용방법 ( MP 사용법 )

HP 서버의 Console 사용 방법입니다..

1. HP Superdome
1.1  Console 사용방법
Lan console이 연결된 PC 또는 SMS서버에서 telnet으로 연결
Console IP는 notebook으로 먼저 serial연결을 통해 알아낸다. 
1.1.1  GSP/MP 접속
C:> telnet 172.0.0.1
 
MP login: Admin  => default Admin계정명
MP password: Admin => default Admin계정 password  입력하면 아래와 같은 MP> prompt가 떨어진다.
 
(c)Copyright 2000 Hewlett-Packard Co.,  All Rights Reserved.
 
                             Welcome to
                  Superdome's Management Processor
 
Utility Subsystem FW Revision Level: 14.22 
 
    MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
1.1.2  CONSOLE 접속
[ssc_dw] MP> co => MP모드에서 console모드로 접근한다.
 
    Partitions available:
 
     #   Name
    ---  ----
     0)  ssc_dw
     1)  dev-dw
     Q)  Quit
 
Please select partition number: 0   => 접근하고자 하는 partition 번호를 선택
 
 
        Connecting to Console:  ssc_dw                                          
                
        (Use ^B to return to main menu.)
 
 
- - - - - - - - - - Prior Console Output - - - - - - - - - -
 
cab0,cell2 active core  8/0/8   10.0/ 0.0 cab0,bay1,chassis1  yes     yes  1
cab0,cell3 active base  4/0/8    4.0/ 0.0 -                   no      yes  0
cab0,cell4 active base  8/0/8   10.0/ 0.0 cab0,bay0,chassis3  yes     yes  1
cab0,cell5 active base  4/0/8    4.0/ 0.0 -                   no      yes  0
cab0,cell6 active base  4/0/8    4.0/ 0.0 -                   no      yes  0
cab0,cell7 absent       -       -         -                   -       -    -
 
 
 
1.1.3 MP 모드 복귀
# ctrl^b (Ctrl + b를 눌러 MP모드로 다시 갈수 있다.) 
 
    MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
1.1.4  파티션 별 부트상태 확인
[ssc_dw] MP> vfp  => partition별로 시스템 부팅과정이나 상태를 확인할 수 있다.
 
 
 
              Entering Virtual Front Panel
 
Select terminal type:
[1] hpterm, 70092, 70094, 2392
 2  vt100, vt220, ansii, xterm
MP:VFP> 
        Welcome to the Virtual Front Panel (VFP).
        Use ^B to exit.
 
 
    Partitions available:
 
     #   Name
    ---  ----
     0)  ssc_dw
     1)  dev-dw
     S)  System (all partitions)
     Q)  Quit
 
Please select partition number: 0  => 0번 partition의 Cell state와 Activity상태가 나온다.
  #  Cell state                    Activity
  -  ----------                    --------
[ssc_dw] MP:VFP (Use '?' to display help or ^B to Quit) >  
 
 
 
1.1.5  Command Mode(CM)로 전환
MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
[ssc_dw] MP> cm  => Command Mode (CM)으로 간다.
 
 
                Enter HE to get a list of available commands
 
                      (Use ^B to return to main menu.)
 
1.1.6  CM모드에서 할 수 있는 명령어
[ssc_dw] MP:CM> he  => CM모드에서 할 수 있는 명령어 들이다. 이 문서에서는 주로 사용하는 명령어 위주로 설명하였다.
 
 
Management Processor (MP) - FW Revision 14.22, Dec  9 2003 at 15:00:01
 
Utility Subsystem FW Revision Level: 14.22 
 
 
The following are the service commands that are available
 
BO      : Boot a partition.
DF      : Display FRU information of an Entity.
MA      : Return to the Main menu.
MR      : Modem Reset
PCIOLAD : Activate/Deactivate a PCI card.
PE      : Power entities on or off.
RE      : Reset entity.
RR      : Reset a partition for reconfiguration.
RS      : Reset a partition.
TC      : Send a TOC signal to a partition.
TE      : Broadcast a message to all users of the MP Command Handler.
VM      : Margin the voltage in a cabinet
WHO     : Display a list of MP connected users
CP      : Display partition cell assignments
HE      : Display the list of available commands
IO      : Display IO chassis/cell connectivity
LS      : Display LAN connected console status
MS      : Display the status of the Modem
PS      : Display detailed power and hardware configuration status.
SYSREV  : Display revisions of all firmware entities in the complex.
CA      : Configure Asynchronous and Modem parameters
CC      : Initiate a Complex Configuration
CP      : Display partition cell assignments
DATE    : Set the time and date
DC      : Reset parameters to default configuration
DI      : Disconnect Remote or LAN Console
ID      : Change certain stable complex configuration profile fields
IO      : Display IO chassis/cell connectivity
IT      : Modify command interface inactivity timeout
LC      : Configure LAN connections 
LS      : Display LAN connected console status
PARPERM : Enable/Disable Partition Reconfiguration
PD      : Modify default Partition for this login session.
RL      : Rekey Complex Profile Lock
SA      : Display and Set MP Remote Access
SO      : Configure Security Options and Access Control
XD      : MP Diagnostics and Reset
 
 
1.1.7  POWER및 HW구성상태
[ssc_dw] MP:CM> ps => power및 hw구성상태를 볼 수있다.
 
This command displays detailed power and hardware configuration status.
 
The following MP bus devices were found:
+----+-----+-----------+----------------+-----------------------------------+
|    |     |           |                |              Core IOs             |
|    |     |           |                | IO Bay | IO Bay | IO Bay | IO Bay |
|    |     |   UGUY    |     Cells      |    0   |    1   |    2   |   3    |
|Cab.|     |           |                |IO Chas.|IO Chas.|IO Chas.|IO Chas.|
| #  | MP  | CLU | PM  |0 1 2 3 4 5 6 7 |0 1 2 3 |0 1 2 3 |0 1 2 3 |0 1 2 3 |
+----+-----+-----+-----+----------------+--------+--------+--------+--------+
|  0 |  *  |  *  |  *  |* * * * * * *   |  *   * |  *   * |        |        |
You may display detailed power and hardware status for the following items:
 
    B - Cabinet (UGUY)
    C - Cell
    G - MP
    I - Core IO
        Select Device: b   => cabinet의 정보를 보고자할 때 선택
 
    Enter cabinet number: 0  => 0번 cabinet선택
 
HW status for SD32A compute cabinet #0: NO FAILURE DETECTED
Power switch: on;  Power: enabled, good;  Door: closed
Fan speed: normal;  Temperature state: normal
Redundancy state: fans and blowers redundant, BPSs redundant
 
                      | Main BP|                 |    IO Backplanes    |
                      | Power  |                 | IO Bay 0 | IO Bay 1 |
               | Main | Boards |      Cells      | Chassis  | Chassis  |
               | BP   | 0 1 2  | 0 1 2 3 4 5 6 7 | 0 1 2 3  | 0 1 2 3  |
+--------------+------+--------+-----------------+----------+----------+
 Populated     |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  |
 Power Enabled |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  |
 Powered On    |  *   | * * *  | * * * * * * *   |   *   *  |   *   *  | => power on상태이번OK
 Power Fault   |      |        |                 |          |          | => fault에 표시없으면OK
 Attention LED |      |        |                 |          |          |
 
                          | Cabinet |    IO     |
            |     BPS     | Blowers |   Fans    |
            | 0 1 2 3 4 5 | 0 1 2 3 | 0 1 2 3 4 |
+-----------+-------------+---------+-----------+
  Populated | * * * * * * | * * * * | * * * * * |
  Failed    |             |         |           | => faile에 표시가 없으면 OK
 
               -- Press <CR> to continue, or 'Q' to Quit --
 
Voltage margin: nominal;  Clock margin: nominal
 
              CLU Status    PM Status    CLU POST
UGUY LEDs:    ***_____      ****         ____
 
                              | Parity   | Connected  | Location      |
 Flex connections | Connected | error    | to cabinet | (Upper/Lower) |
+-----------------+-----------+----------+------------+---------------+
  XBC [7-0]       | NYNYNYNY  | NNNNNNNN | 00000000   | N/A           |
  RC [7-0]        | NNNNNNNN  | NNNNNNNN | 00000000   | LLLLLLLL      |
 
PM  firmware rev 14.6, time stamp: TUE SEP 30 12:18:17 2003
CLU firmware rev 14.4, time stamp: WED JUL 09 14:57:57 2003
 
[ssc_dw] MP:CM> ps
 
This command displays detailed power and hardware configuration status.
 
The following MP bus devices were found:
+----+-----+-----------+----------------+-----------------------------------+
|    |     |           |                |              Core IOs             |
|    |     |           |                | IO Bay | IO Bay | IO Bay | IO Bay |
|    |     |   UGUY    |     Cells      |    0   |    1   |    2   |   3    |
|Cab.|     |           |                |IO Chas.|IO Chas.|IO Chas.|IO Chas.|
| #  | MP  | CLU | PM  |0 1 2 3 4 5 6 7 |0 1 2 3 |0 1 2 3 |0 1 2 3 |0 1 2 3 |
+----+-----+-----+-----+----------------+--------+--------+--------+--------+
|  0 |  *  |  *  |  *  |* * * * * * *   |  *   * |  *   * |        |        |
 
You may display detailed power and hardware status for the following items:
 
    B - Cabinet (UGUY)
    C - Cell
    G - MP
    I - Core IO
        Select Device: c  => cellboard별로 status확인할 때 
 
    Enter cabinet number: 0
    Enter slot number: 0
 
HW status for Cell 0 in cabinet 0: NO FAILURE DETECTED
Cell power Status: enabled, good, no fault, NVRAM battery good
Boot is NOT blocked; PDH shared memory is Initialized
Cell Attention LED is off, PDH status LEDs:  _***
Cell enabled by PDHC 
Core cell is cabinet 0, cell 0
RIO cable status: connected
RIO cable connection physical location: cabinet 0, IO bay 1, IO chassis 3
 
|    CPU Modules    |                        |Cell Power Board |
|         |         |       Cell Board       |Converter Faults |
|Populated| Faulted | Power Converter Faults | MEM | JAB | IB  |
| 0 1 2 3 | 0 1 2 3 |CLK|L2C|LNK|CORE|FSB|48V|0 1 2| 0 1 |0 1 2|
+---------+---------+---+---+---+----+---+---+-----+-----+-----+
| * * * * |         |   |   |   |    |   |   |     |     |     |
 
|                 |   Side: |        A       |        B       |
|  DIMM Presence  | Echlon: |0123456789ABCDEF|0123456789ABCDEF|
|                 |         |*****___________|*****___________|
 
Cell Compatibility: Complex - B, Partition - C; CPU Compatibility: C
PA System firmware rev 20.8
 
 
1.1.8  SYSTEM FIRMWARE LEVEL 확인
[ssc_dw] MP:CM> sysrev => system firmware level를 확인하는 명령어
Utility Subsystem FW Revision Level: 14.22 
 
                       |   Cabinet #0    |
-----------------------+-----------------+
                       | SYS FW |  PDHC  |
Cell (slot 0)          |  20.8  |  14.18 |
Cell (slot 1)          |  20.8  |  14.18 |
Cell (slot 2)          |  20.8  |  14.18 |
Cell (slot 3)          |  20.8  |  14.18 |
Cell (slot 4)          |  20.8  |  14.18 |
Cell (slot 5)          |  20.8  |  14.18 |
Cell (slot 6)          |  20.8  |  14.18 |
Cell (slot 7)          |        |        |
                       |                 |
MP                     |      14.22      |
ED                     |       2.2       |
CLU                    |      14.4       |
PM                     |      14.6       |
CIO (bay 0, chassis 1) |      14.4       |
CIO (bay 0, chassis 3) |      14.4       |
CIO (bay 1, chassis 1) |      14.4       |
CIO (bay 1, chassis 3) |      14.4       |
 
[ssc_dw] MP:CM> 
 
1.1.9 POWER ON/OFF
[ssc_dw] MP:CM> pe => 시스템 cabinet 또는 cell 또는 IO chassis단위로 power on/off를 하는 명령어
 
This command controls power enable to a hardware device.
 
    B - Cabinet
    C - Cell
    I - IO Chassis
        Select Device: b
 
    Enter cabinet number: 0  => 0번 cabinet선택
 
    The power state is ON for Cabinet 0.
    In what state do you want the power? (ON/OFF) q  => off하면 0번 cabinet power off됨, 여기서는 q로 취소함.
[ssc_dw] MP:CM>
 
1.1.10  Chassis 연결 상태 확인
[ssc_dw] MP:CM> io => io chassis (io cardcage)와 cellboard간의 연결상태 확인명령어, cab-bay-chassis 순서로 확인된다. 이 번호는 전,후면 EMI panel 그림을 참조한다.
 
--------------------------+
Cabinet |   0    |   1    |
--------+--------+--------+
Slot    |01234567|01234567|
--------+--------+--------+
Cell    |XXXXXXX.|........|
IO Cab  |000.0...|........|
IO Bay  |101.0...|........|
IO Chas |311.3...|........|
 
1.1.11 GSP LAN 구성 확인
[ssc_dw] MP:CM> ls => customer LAN console및 private LAN console의 구성상태를 확인
 
Current configuration of MP customer LAN interface
  MAC address : 00:30:6e:f3:23:c1
  IP address  : 172.0.0.1       0xac000001
  Name        : ssc-dw                     (Flash : ssc_dw)
  Subnet mask : 255.255.255.0   0xffffff00
  Gateway     : 172.0.0.3       0xac000003
  Status      : UP and RUNNING 
 
Current configuration of MP private LAN interface
  MAC address : 00:a0:f0:00:f5:4b
  IP address  : 172.0.0.1       0xac000001
  Name        : ssc-dw                    
  Subnet mask : 255.255.255.0   0xffffff00
  Gateway     : 172.0.0.1       0xac000001
  Status      : UP and RUNNING 
 
1.1.12  실시간 사용자 리스트
[ssc_dw] MP:CM> who => lan console접근 사용자 검색
 
 
User Login         Port Name      IP Address
Admin                LOCAL     
Admin                LAN        172.  0.  0.  5
Admin                LAN        172.  0.  0.  5
 
 
1.1.13  파티션별 CELL BOARD 구성
[ssc_dw] MP:CM> cp => partition별로 할당된 cellboard 확인
 
-------------------------------+
Cabinet      |   0    |   1    |
-------------+--------+--------+
Slot         |01234567|01234567|
-------------+--------+--------+
Partition  0 |XX.X.XX.|........|
Partition  1 |..X.X...|........|
 
1.1.14 MP 모드 시간설정
[ssc_dw] MP:CM> date  => MP 모드의 시간설정 명령어
 
This command sets the date and time on the MP.
 
    Current date is: 11/18/04
    Do you want to modify it? (Y/[N]) q
 
 
1.1.15 OS 강제 DUMP (TOC)
[ssc_dw] MP:CM> tc  => partition상에 hang같은 문제가 발생시 dump를 받기위해 TOC할 때
 
This command TOCs the selected partition.
 
WARNING: Execution of this command irrecoverably halts all system
         processing and I/O activity and restarts the selected
         partition.
 
 
     #   Name
    ---  ----
     0)  ssc_dw
     1)  dev-dw
Select a partition number: q => 실제는 해당 partition을 지정
 
1.1.16 Partition Reset
[ssc_dw] MP:CM> rs => partition을 hard reset할 때 사용
 
This command resets the selected partition.
 
WARNING: Execution of this command irrecoverably halts all system
         processing and I/O activity and restarts the selected
         partition.
 
 
     #   Name
    ---  ----
     0)  ssc_dw
     1)  dev-dw
 
    Select a partition number: q => 실제는 partition number 지정
 
 
1.1.17 CONSOLE LOG 확인
[ssc_dw] MP:CM> 
 
    MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
[ssc_dw] MP> cl => parition별로 console log확인시 (console에서 작업했던 내용 trace시 필요)
 
    Partition Console Logs available:
#   Name
    ---  ----
     0)  ssc_dw
     1)  dev-dw
     C)  Clear a partition's console log.
     Q)  Quit
 
MP:VW> 1   => 1번 partition의 console에 display되었던 내용을 볼 때
lume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Activated volume group 
Volume group "/dev/vg01" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data01" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data02" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data03" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data04" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data05" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data06" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_data07" has been successfully changed.
Activated volume group 
Volume group "/dev/vg_db01" has been successfully changed.
 
(F)irst, (L)ast, (N)ext or <cr>, (P)revious, ^B to exit to menu
 
 
1.1.18 시스템상에 발생된 HW Chassis Log 보기
[ssc_dw] MP> sl   => 시스템상에 발생된 HW chassis log을 볼 때 사용
 
    EVENT LOG MENU:
 
        FPL: Forward Progress Log
        SEL: System Event Log
       LIVE: Live Events
 
        CLR: Clear FPL and SEL
          Q: Quit
 
MP:VW> sel  => system event log확인
 
 
             Welcome to the SEL (System Event Log) Viewer
 
   The following SEL navigation commands are available:
         D: Dump log starting at current block for capture and analysis
         F: Display first (oldest) block
         L: Display last (newest) block
         J: Jump to specified entry and display previous block
         +: Display next (forward in time) block
         -: Display previous (backward in time) block
      <cr>: Repeat previous +/- command
      <sp>: Repeat previous +/- command
         ?: Display help
        ^B: Exit viewer
 
   The following event format options are available:
         K: Keyword
         R: Raw hex
         T: Text
 
   The following event filter options are available:
         A: Alert level
         C: Cell
         U: Unfiltered
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  
19847 SFW  0,4,0  2 4b000f6240e000ca 01000000418ecb21 FABRIC_XIN_TRY_LINK_INIT
19847                                                 11/08/2004 01:25:53
19846 SFW  0,2,0  2 4b000f6220e000c9 01000000418ecb1b FABRIC_XIN_TRY_LINK_INIT
19846                                                 11/08/2004 01:25:47
19845 SFW  0,4,5  2 578003dd45e000c7 0000000000000003 ERR_TOC_TASK
19845                                                 11/08/2004 01:23:27
19844 SFW  0,2,2  2 578003dd22e000c5 0000000000000003 ERR_TOC_TASK
19844                                                 11/08/2004 01:23:27
19843 SFW  0,4,3  2 578003dd43e000c3 0000000000000003 ERR_TOC_TASK
19843                                                 11/08/2004 01:23:27
19842 SFW  0,2,7  2 578003dd27e000c1 0000000000000003 ERR_TOC_TASK
19842                                                 11/08/2004 01:23:26
19841 SFW  0,4,7  2 578003dd47e000bf 0000000000000003 ERR_TOC_TASK
19841                                                 11/08/2004 01:23:26
19840 SFW  0,2,5  2 578003dd25e000bd 0000000000000003 ERR_TOC_TASK
19840                                                 11/08/2004 01:23:26
19839 SFW  0,4,5  2 57800f7345e000bb 2000000000000000 ERR_CPU_CHECK_SUMMARY
19839                                                 11/08/2004 01:23:26
19838 SFW  0,4,1  2 578003dd41e000b9 0000000000000003 ERR_TOC_TASK
19838                                                 11/08/2004 01:23:26
 
19837 SFW  0,2,3  2 578003dd23e000b7 0000000000000003 ERR_TOC_TASK
19837                                                 11/08/2004 01:23:26
 
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > 
 
    MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
[ssc_dw] MP> sl
 
    EVENT LOG MENU:
 
        FPL: Forward Progress Log
        SEL: System Event Log
       LIVE: Live Events
 
        CLR: Clear FPL and SEL
          Q: Quit
 
MP:VW> sel
 
 
             Welcome to the SEL (System Event Log) Viewer
 
   The following SEL navigation commands are available:
         D: Dump log starting at current block for capture and analysis
         F: Display first (oldest) block
         L: Display last (newest) block
         J: Jump to specified entry and display previous block
         +: Display next (forward in time) block
         -: Display previous (backward in time) block
      <cr>: Repeat previous +/- command
      <sp>: Repeat previous +/- command
         ?: Display help
        ^B: Exit viewer
 
   The following event format options are available:
K: Keyword
         R: Raw hex
         T: Text
 
   The following event filter options are available:
         A: Alert level
         C: Cell
         U: Unfiltered
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > t  => text format모드로 좀 더 자세히 보고자 할 때
Switching to text format.
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  
Log Entry 19847:    11/08/2004 01:25:53
Alert level 2:  Informational 
Keyword:  FABRIC_XIN_TRY_LINK_INIT
About to initalize the CC link
Reporting Entity:  System Firmware located in cabinet 0, slot 4, cpu 0 
0x4b000f6240e000ca 0x01000000418ecb21
 
Log Entry 19846:    11/08/2004 01:25:47
Alert level 2:  Informational 
Keyword:  FABRIC_XIN_TRY_LINK_INIT
About to initalize the CC link
Reporting Entity:  System Firmware located in cabinet 0, slot 2, cpu 0 
0x4b000f6220e000c9 0x01000000418ecb1b
 
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) >  
Log Entry 19845:    11/08/2004 01:23:27
Alert level 2:  Informational 
Keyword:  ERR_TOC_TASK
This chassis code identifies the type of TOC encountered
Reporting Entity:  System Firmware located in cabinet 0, slot 4, cpu 5 
System Firmware Return Code:  0x0000000000000003
0x578003dd45e000c7 0x0000000000000003
0x4b0003dd45e000c8 0x01000000418eca8f
 
Log Entry 19844:    11/08/2004 01:23:27
Alert level 2:  Informational 
Keyword:  ERR_TOC_TASK
This chassis code identifies the type of TOC encountered
Reporting Entity:  System Firmware located in cabinet 0, slot 2, cpu 2 
System Firmware Return Code:  0x0000000000000003
0x578003dd22e000c5 0x0000000000000003
0x4b0003dd22e000c6 0x01000000418eca8f
 
 
MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > 
 
1.1.19 MP 접속 종료
MP MAIN MENU:
 
         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection
 
 
[ssc_dw] MP> x   => MP 접속 종료시

0

Comment *

댓글 달기

8,280,770

전체

380

오늘

4,609

어제

Skin By KEBIBLOG Ver 1.0 Copyright ⓒ KEBI BLOG. All rights reserved.